Comment on Screwdriver by Hippo-Are-Smell

first you need to gather your materials..

- LED light (any sort and/or colour you want. I used white cause thats the only one I had).

- Wiring (I used copper wire which in retrospect was a bad idea.. go with something thinner and more flexable. Might need a couple pieces and should at least be a little bit longer then your tube).

- A switch, can be any old switch.

- Some sorta tube that you can use to hold your wiring, LED and power source.

- Power source (I used a couple watch batteries but you might have to play around with the type of battery you use depending on the type of LED you use.

- Tape (optional, i just used it for decoration)

- Hot glue gun (Or you can sauder it if you want but hot glue is easier to work with)

Once your ready to start attach the wiring to both ends of your LED. Now on mine I could'nt put the wiring through the tube and have it still attached to the switch, Hence the wires being wrapped around it. Once you have the wiring attached to the switch attach the other ends of the wires to the power source. Flick the switch and If the LED light does'nt come on try switching the wires around on the power source. Tape up the tubing to give it a nice design and your all done. Your very own home made Sonic Screwdriver. Does'nt make nosie.. sorry..

If you have anymore questions or if you feel like I left out something, Don't hesitate to ask.